All complete system that you need to connect to your HPA Engine
-Redline SFR regulator unit
-42" long 1/4" widebore air line
-Braised Line for extra protection
-1 QD Fitting included
New SFR(Super Fast Refresh Rate) regulator features an insane refresh rate for a more consistent output for your Full Auto fire and increase the consistency of your HPA system.
With Single QD and wider bore size, more air flow can be supplied to engine at same time which increases the consistency even more. This is a must have condition for Daytona Gun as they drain a lot of air on full auto.
This air system is based on Redline Airsoft's new Firebase regulator. Designed to address the short comings of all the other currently available Airsoft regulators, the Firebase is hands down the finest regulator available for your
-Daytona Gun Systems
-Wolverine Inferno/Hydra Units
-V12 and PolarStar Engines-ProTech MK Unit
Engines are more efficient and run at lower pressures than in the past. Therefore the demands on the regulator have changed too.
With the lower operating pressures and higher efficiencies of modern HPA engines, the regulator must be much more sensitive in order to properly react to the smaller "pressure pulse" of ea...ch shot. This is especially true when running a remote hose since the air volume in the hose acts as an "air capacitor" further dulling the pressure pulse that the regulator sees. Failure of the regulator to react properly to this dulled (dampened) pressure pulse can be interpreted by the user as "shoot down" or a "slow refresh rate."
The SFR is Redline Airsoft's newest regulator. It combines high sensitivity and a super fast refresh rate with a high flow design. It performs equally well whether powering an air sipping Wolverine "SMP" at 40 PSI or powering an air hungry Daytona gun at 120 psi. It also works with both standard high output and SLP/ELP type low output tanks.
The SFR is a fully balanced regulator. Why is that important?
Unbalanced regulators are subject to what is known as "supply pressure effect." That means the regulators output pressure is affected by changes to its input pressure.
Unbalanced regulators can have a very large pressure change as their supply tank empties. Importantly on some types of regulators, that pressure change can cause the regulators output pressure to rise as the supply tanks pressure drops. That can result in an undesirable situation since any rise in output pressure will cause a corresponding rise in velocity.
The SFR's output pressure is unaffected by changes to its input pressure. That means even as your tank empties, the SFR's output pressure and therefore your velocity, will remain unchanged.
The SFR also includes a new, more intuitive, integrated tournament lock and an overpressure relief valve. The Redline SRF is 100% made and assembled in the USA"
DaytonaAirsoft will allow Domestic customers to return products within two weeks of purchase or delivery date if the products are still in brand new condition with the original packaging. International Order will not be eligible for any kinds of exchange/store credit refund unless DOA has occurred. Purchases older than two weeks are not eligible. We do not offer refunds, but we can give store credit or an exchange subject to a 15% restocking fee. There is no warranty and we do not accept returns or exchanges for items on clearance or sold through a special event.
If you would like a return or exchange, please contact us via phone, email, or Facebook. We must first approve of the return or exchange, and then we will provide shipping instructions. The customer is responsible for all shipping and handling fees on return merchandise.
Products that are defective within 48 hours of purchase or delivery are considered dead on arrival (DoA). DoA items are subject to the same rules dictated above, however, Daytona Airsoft will cover shipping fees both ways. Daytona will not be held accountable for damage incurred during transit to our store.
Prior to shipment of your order, you may cancel your order at any time by emailing us at email@example.com. Please note your order is not cancelled until a cancellation confirmation is sent via email. Orders that have already been shipped cannot be canceled.
We reserve the right to cancel an order without prior notice.
Please ensure that your payment information is correct to avoid unexpected delays or order cancellations. Please review your order information.
-Credit Card information: Number, Expiration Date, CVC Code
-Billing information must match that provided by your financial institution
-Complete address information
-There will be a 10% restocking fee on orders canceled after they have been packed, shipping fees are non-refundable.
Daytona Gun HPA Kit 180 Days Limited Warranty
Your Daytona Gun Airsoft Kit carries a 180 days limited warranty which covers defects in manufacturing and material for the first 180 days from the date of purchase. Daytonagun Airsoft will repair or replace any defective parts at their discretion. This warranty is non-transferrable.
In order to be eligible for warranty service, the unit must be presented with original bill of sale or receipt. This warranty does not cover damage due to user errors includes but not limited to misuse/abuse of the system, improper installation, or operating the Daytona Gun outside of the manufacturer's specified operating range. For example, operating the system on over 130psi, no sufficient lubrication, etc
Not covered by this warranty are:
--Crush Ring ,shaft Spring & Hopup Bucking
--Normal Parts wear and tear
--Acts of God
--Component modifications not performed by Authorized Daytona Gun Dealer
Buyers outside of the Canada will be responsible for any and all duties, fees, and taxes for the products they order.
Warranty claims should be brought in writing to Daytonagun Airsoft , Canada at firstname.lastname@example.org, with proof of purchasing.
It is the responsibility of the customer to ship the kit to Daytonagun Airsoft at the customer's expense for warranty repair/replacement. Return shipping to the customer will be provided by Daytonagun Airsoft, Canada, via CanadaPost Service, HK Postal Service or other courier at Daytonagun Airsoft's discretion. Standard time for warranty return shipments is generally 2-7 business days for domestic (Canada) and up to 15 days for international shipments depending on your country's customs agency.
International customers may be directed to ship their units to an authorized service dealer within their country or region instead of shipping to our facilities in the Canada or Hong Kong.
Daytonagun Airsoft Reserves the Rights for Final Explanation.