Non-service Items
Non-service Items
Daytona Hopup Rubber (Standard Bucking / Flat Bucking)
***We ship internationally*** Price is for ONE bucking. Standard Bucking: Replacement bucking for your DG system. Made of 70 Dura Synthetic rubber. Optimized for full-auto fire. Flat Hopup Bucking (Improved): Improved tunnel design for better rhop consistency on...
$24.95
Daytona Flat Tip Hopup Screw (Metal Tip / Rubber Tip)
Soft rubber tip screw (chrome body with rubber tip): -Provides more consistent contact area via soft rubber tip. -Significantly reduces the chance of over-adjusting and tear through the hopup bucking. -Improves hopup performance on both standard DG bucking or rHop patch. One...
from $3.95
Daytona O-Ring Repair Kit
***We ship Internationally***
Replacement o-ring set for fixing your seals.
The kit comes with 9 o-rings.
ID x WD
(x1) 2 x 1mm
(x1) 2 x 1.5mm
(x1) 5 x 1.5mm
(x4) 5.8 x 1.9mm
(x2) 9.3 x 2.4mm
$4.95
Daytona Improved Reap Hopup Rubber Bucking
Do NOT boil this rubber!!!! Improved Reap nub design for better consistency (drop-in bucking). Provides similar performance as rHop mods for DG systems. Hard-stop lip to prevent BBs from over-travel. Optional brass holding ring included for use if BBs roll/drop out *Plunger...
$34.95
Daytona LCT & E&L AK/RPK HPA Recoil Conversion Kit
IMPORTANT INFORMATION, PLEASE READ (last updated Nov 18, 2023) We have plenty of AK kits IN-STOCK now! NEW 2022 VERSION! (Pictures may differ from actual product) Best used in LCT NV AK and RPK series. Only works for standard...
from $699.95
Daytona Gun In-grip Line (DGIL)
**The DGIL is not compatible with the LMG-series Daytona Gun kits.** Daytona Gun In-grip Line (DGIL) is a replacement and upgrade for the standard 6mm pneumatic hose included with the Daytona Gun kits. It offers extra protection for the line and increases airflow through...
$34.95
Daytona A&K / CA M249 HPA Recoil Conversion Kit
Designed for CA M249 / A&K M249 / Echo1 M249 / Matrix M249 series. Not compatible with Featherweight version. Can work with Middleweight version with modifications. *2020 Gen 5 kit, increased air volume for better power output as well as heavier...
from $699.95
Daytona Reinforced POM Airshaft Crush Ring
The price is for one crush ring.
Reinforced crush ring for your DG system.
Properly machined from one piece of POM rod, significantly increased durability.
$14.95
Daytona Plunger Spring
Steel replacement compression spring for plunger spring mod.
Price for 1 spring.
$5.95
Daytona Reinforced Airshaft Spring (2020 Gen 3 Version)
Gen 3 airshaft spring offers better buffering for your DG, which improves cycling smoothness, and cushioning effect, and reduces wear and tear on your airshaft and bolt tank. Steel spring with linear design ensures excellent cycling every time.
from $4.95
GETSOME 1000 Supreme Lubricant (4oz Needle Bottle)
---Ship Internationally--- Best Lubrication for your Daytona system, gas blowback system, real steels and so much more! Stop worrying about your O-ring, Get Some will definitely not damage anything! GETSOME 1000 is Long Lasting, Non-static, non-toxic, non-staining, non-conductive, it will not dry...
$22.95
Daytona Reinforced Gen 2 Low Power Airshaft (w/ POM Ring)
**Build to order** *Only ONE (1) airshaft included* Item may take approximately 10 ~ 15 business days to prepare and ship. Gen. 2 Low Power airshaft for your Daytona kit. Please specify which kit you are using under the options section....
$99.95
Daytona Replacement Screw Set
Each set contains a sufficient number of screws to replace all screws on single Daytona Kit. Screw Spec: 10x M4x4 SetScrews (Hopup Chamber and Airshaft Collar) 1x M5x5 SetScrew cup tip (Hopup Adjustment Hole) 1x M5x5 SetScrew metal flat tip (for rHop) 1x M3x6 SetScrews (trigger...
$11.95
Z Custom Airsoft Works Gen 2 Follower (Pack of 5)
The problem with most AEG magazines is that the internal BB channels are double stack, while the followers are typically undersized single stack followers in order to go all the way to the top of the mag. Double stack sized...
$17.95
Daytona Plunger/Airshaft Shims Set (1mm Brass / Steel)
Spacers between the plunger and hopup unit.
Able to fix or improve some DG builds with BB placement issues.
$2.00
Shipping Insurance
Available for UPS domestic/international and Canada Post domestic shipments ONLY. Unavailable for Canada Post international shipments. If you purchase this and choose Canada Post international, your shipment will NOT be insured! Message us to swap to UPS instead if you...
$15.00
GETSOME 1000 Supreme Lubricant (2oz Needle Bottle)
---Ship Internationally--- Best Lubrication for your Daytona system, gas blowback system, real steels and so much more! Stop worrying about your O-ring, Get Some will definitely not damage anything! GETSOME 1000 is Long Lasting, Non-static, non-toxic, non-staining, non-conductive, it will not dry...
$13.95
Daytona Reinforced Airshaft (w/ POM Crush Ring)
**Build to order** Item may take approximately 10 ~ 15 business days to prepare and ship. Replacement reinforced airshaft for your Daytona kit. Please select which kit you are using under the options section. The shaft comes with a complete airshaft spring...
$89.95
Redline Mini SFR High Air Flow Regulator Set (Single QD, Widebore Line)
All complete system that you need to connect to your HPA Engine Set Includes: -Redline SFR regulator unit -42" long 1/4" widebore air line -Braided Line for extra protection -1 QD Fitting included New product release! The Redline Airsoft,...
from $239.95
Daytona Gun Air Line (With Fitting)
Replacement air hose for your DG system.
The price is for 1 line.
$14.95
Daytona A&K PKM HPA Recoil Conversion Kit
Designed for the A&K PKM and Raptor PKP. The Daytona Airsoft PKM kit converts your AEG PKM/PKP to a HPA-powered recoil system. No more green gas or propane cooldown. Standard version offers around 1.5 - 1.8J with 0.20g BBs @ 120 PSI. Low power version offers around...
from $699.95
Daytona Brass Barrel Ring (12.4mm / 12.9mm / Friction Ring)
Friction fit ring WE Scar-L WE Scar-H WE PDW CA G36 CA FAL/SA58 G&P WOC M4 (also compatible with 12.9mm barrel ring) VFC MP5 ZINC BODY 12.4mm c-clip ring WE M4 WE MSK 12.9mm c-clip ring G&P WOC M4 VFC...
from $14.95
Daytona Complete Hopup Chamber/Unit Set
Daytona Gun OEM hopup unit replacement.
Please allow 10 - 15 business days to process your order.
Made of machined brass, steel, and aluminum.
The set comes with: hopup chamber, barrel ring, feed tube, and standard hopup rubber.
from $114.95